Products

Industrial Wood Coating Systems

From toner and dye stains to topcoats, *solvent or water base, EMCO can offer you a step-by-step finish that meets your production requirements for consistent color, regulatory compliance and performance. Products include: Water Base Sealer and lacquer, Conventional Nitrocellulose Sealers and Lacquers, Precatalyzed Sealers and Lacquers, Post Catalyzed Conversion Varnish, Two Component Polyurethane, Three Component Polyesters, Water and Solvent Base Stains, Spray Stains, Glazes.

Industrial Coatings

From concrete to heavy equipment, EMCO offers PPG Industrial Coatings and INSL-X Superior Coatings for maintenance and manufacturing.

Solvents & Custom Solvent Blends

Custom-blended & replacement solvents – EMCO manufactures thinners, reducers, retarders, fish eye eliminators and wash-off solutions. EMCO can supply the necessary chemicals and solvents for your production facility. We can blend to match a competitive product or formulate a “replacement solvent” to lower VOC(s) for environmental compliance.

Paint Strippers

EMCO manufactures paint removers suitable for “do-it-your-selfers” or commercial/industrial applications. We offer strippers for dip tank use or semi-paste strippers for vertical surfaces.

Glues &Adhesives

EMCO stocks adhesives from Franklin International for assembly, hot/cold pressing and radio frequency curing. We offer brush/roll and spray grade contact adhesives from Henkel.

Spray Application & Paint Kitchen Equipment

Industrial applications for wood and metal finishing usually involve a spray-applied coating. EMCO sells, installs and services spray equipment from world-class manufacturers. EMCO is a distributor of products from Binks and Devilbiss, Kremlin, 3M (ACCUSPRAY) and Spraying Systems. Let EMCO recommend a complete system to dispense, condition (filter or heat), recirculate and apply the coatings on your product.

Spray Booths

Spray booths are the work area for applying the coatings by spray application to exhaust the overspray solid particles and solvent vapors through a bank of filters to outside of the building.

Spray Booth Coatings

Spray booth coating is a paint film that is spray-applied to the walls and ceiling of an industrial paint booth. This coating eases clean up of overspray in the work area by allowing the user to peel the soiled film from the entire wall and remove the overspray with it. It is available either white or clear. On walls, the white provides reflectance for a brighter work area to show details of the work piece and allow the technician a better opportunity to avoid defects in the finish. The clear is used to protect lenses over light fixtures in the ceiling or booth walls. Rather than having a technician spend hours scraping or wiping the lenses to clean them, simply peel away the soil and reapply fresh coating.
EMCO offers booth coating in both solvent base (EMCOLOPE product# 2799) and water base (AQUALOPE product# 4304).

Abrasives - Coated, Bonded & Non-Woven

Abrasives or sandpaper come in a variety of materials and minerals. Coated abrasives come in cloth, paper or film backed. Bonded abrasives refer more to grinding steel with a hard abrasive wheel. Non-Woven material consists of nylon fibers impregnated with abrasive grains throughout and bonded with synthetic resins.

Tools & More

Using quality hand tools in the woodworking and metal working industries will always reflect the quality of the finished products. That is why Emco only carries Dynabrade Hand Tools. We also distribute tack rags, Spray Booth Filters, Spray Booth Floor Paper, Cans, Bottles, Pails and drums.